Specification: Including 4pcs 21700 battery alreadyEmitter: 1*Cree XHP70.3 HI+7*Cree XHP70.2 HD LEDsFlux: 58000 lumensIntensity: 433000kcd(ANSI throw 1315 meters)Power: 612W(max)Firmware: Anduril Firmware with defaulted smooth Ramping UI. Instant access to a TURBO mode and mode settings are also provided.Battery: Four 21700 battery. Flat-top and unprotected cells with max length 71mm.Lens: Gass with anti-reflective coatingProtection: Reversed protection, over-charged protection, over-discharge protection, over-heat protectionBody: Aluminum with TYPE III heard-coat anodizingHandle bar: IncludedLanyard hole: Available: Tripod socket: Standard 1/4 inch threaded(1/4-20 UNC)Button: Tactile with back-lit rubber bootIngress rating: Equivalent to IP68Weight: Approximately 1745g with cells and handleDimensions: 93mm(head)*174mm (length)*63mm(tube)With USB Type-C Quick charge/discharge function. Discharge as power bank function, support maximum discharge current of 5A. for the detail can check with the User manual .
Operation instruction: From OFF1 Click : Memorized levelHold: lowest leven then ramp up2 clicks: highest ramp levelClick, hold: highest level then ramp down3 clicks: specials(battery check, good night, beacon, tempcheck)Click, click, hold: Strobe(candle, bike flasher, party strobe, tactical strobe, lightnihg storm)4 clicks: lock-out5 clicks: memotary mode(disconnect power to exit)6 clicks : Muggle mode7 clicks: Aux button led low/high/flash/off.
Here also with the In steady mode ; Ramp configuration mode; strobe group modes;Party/Tactial strobe modes; Blinky group modes; Lockout mode; Momentary mode;Muggle mode, please check the User manual for the details.