Specification:
Brand |
LUMINTOP |
Emitter |
XP-L HI 3D (NW 5000K)
XP-L HI 1A (CW 6500K)
Nichia 219C 4000K
SST20 4000K
|
Optic |
Standard TIR optics |
Lens |
Glass with anti-reflective coating |
Flux |
~2800 lm (XP-L Hi), ~1600 lm (Nichia) |
Intensity |
~10 000 cd ANSI throw ~200 m (XP-L Hi) |
Firmware |
The HL3A uses free software called Andúril, distributed under the terms of the GPL v3. Code is available from |
Driver |
FET+7+1 driver. Low parasitic drain while OFF |
Battery |
1 x 18650 Battery(not included)
unprotected cell recommended
|
Body |
Aluminum with hard-coat anodizing |
Switch |
Electronic tail switch |
Ingress rating |
Equivalent to IPX7 |
Size |
33.8 mm Ø head x 81 mm length |
Weight |
Approximately 54g without cells |
User interfaces:
[1] By default the HL3A is set to use SMOOTH RAMPING. Instant access to TURBO mode is also provided.
[2] A more conventional STEPPED RAMPING UI is available if you like discrete modes level. You can choose how many steps you want.
[3] MOMENTARY mode is useful for signaling purposes or rapidly/briefly lighting up targets. To exit this mode, physically disconnect power
[4] MUGGLE mode uses a reduced output.
[5] It has an electronic LOCKOUT for safety, but acts also as momentary low light.Other functions: Battery check, sunset, beacon tactical strobe, party strobe, bike flasher, candlelight, lighning storm