Skilhunt H300R headlight with XHP50.3 HI led

• LED: Cree XHP50.3 HI 6500K
• Max output:  ANSI 2050 Lumens
• Max beam distance: 9500cd 
• Max peak beam intensity: 195 meters 
• Waterproof: IPX-8
  Impact resistant: 1 Meter
  Battery: 1×18650 , 2x CR123A
  Rated Range: 2.7V ~ 8.4V
• Dimension:
  Length 104.7mm / 4.12 inch
  Head diameter 25.2mm / 0.99 inch
  Body diameter 21.6mm/0.85 inch
• Weight: 54g / 1.90 oz (without battery)

Accessories: Headband, clip, lanyard, magnet replace rubber pad, Operator’s manual, Spare O-ring

Operation

Battery installation & Replace magnet: Insert the battery positive pole toward the light head, otherwise it will not work.
Ensure when the light turning on,the beam is directed away from the eyes.
When take the light with Bankcards(magnetic) or Cell phone,should replaced Magnet with rubber pad.

Turn ON/OFF & Mode transfer

When the flashlight was OFF status:
Click switch to Common used (H-M1-M2) mode.
Quickly double click switch to Turbo(T1/T2) mode.
Quickly triple click switch to Strobe(S1/S2/S3) mode.
Hold press switch 0.5 second to Low(L1/L2) mode.

When the flashlight was ON(any mode) status:
Click switch to turn off.

When the flashlight was on ( T1/T2, H/M1/M2, L1/L2 )
Press and hold the switch to automatically cycle, the level is selected when the side switch has been released, turn off memorized.

When the flashlight was on (H/M1/M2, L1/L2 )
Quickly double clicks switch tranfer Common used mode(H/M1/M2) to Trubo(T1/T2), repeat quickly
double clicks switch back to Common used mode(H/M1/M2)
Quickly triple clicks switch transfer Strobe mode, repeat quickly triple clicks switch back to previous mode.
When the flashlight was ON (S1/S2/S3)
Quickly double clicks switch tranfer S1-S2-S3, turn off memorized.

Location indicator & Lock-out function

when turn off the flashlight, quickly click switch 4 times, location indicator switch on and lock-out function
activation at same time,the indicator light flash every second. Double clicks can switch the indicator on/off,
Quickly click switch 4 times, switch button unlock and enter into Low(L1) mode.

Power indicator & Low voltage indication

Every time turn on , the side indicator will be light 5 seconds to display the battery power.

Blue light constant on: 100%~80% ,
Blue light blinks: 80%~50% ,
Red light constant on: 50%~20% ,
Red light blinks: 20%~0.

When the battery voltage drop down lower than 3.0V,indicator flash twice every 2 sec.
the light fast flash every 30 seconds at same time.
When the battery voltage drop down lower than 2.7V,the light will cut off.

Charging instructions and notices:
In charging, the red indicator constant light on, when battery almost full charge,indicator
change to constant blue light.